中文字幕一级黄色A级片|免费特级毛片。性欧美日本|偷拍亚洲欧美1级片|成人黄色中文小说网|A级片视频在线观看|老司机网址在线观看|免费一级无码激情黄所|欧美三级片区精品网站999|日韩av超碰日本青青草成人|一区二区亚洲AV婷婷

您當前的位置：檢測資訊 > 科研開發

產品環境測試標準清單

嘉峪檢測網        2025-11-28 09:00

最近參與了幾個可靠性和環境測試相關標準的討論和學習，發現其實還是挺有意思的，最多問的問題就是這些測試條件的出處是哪兒？為什么是這個條件？不同產品類型是否要按照同一個測試條件來進行？
 
爭論普遍都比較激烈，怎么說呢，都合理也都有待商榷的地方。
 
其實在IEC 有一系列的相關標準，環境測試和可靠性本身就是一個古老而有有很多爭議的話題。所有的測試和評估都會基于當下的認知、’技術水平和社會環境等眾多的因素。
好了話不多說了，提供一下標準清單，大家都可以依葫蘆畫瓢去看看國際專家們是怎么來考慮這類問題的， 他們又是怎么來定義環境測試分類和測試條件的。
 
先上一下IEC 60068系列標準，這是目前IEC 關于環境測試的系列標準,定義很多環境因素下的測試方法：
 
Reference
Title
IEC 60068-1:2013
Environmental   testing - Part 1: General and guidance
IEC 60068-2-1:2025
Environmental   testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-2:2025
Environmental   testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-5:2018
Environmental   testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level   and guidance for solar radiation testing and weathering
IEC 60068-2-6:2007
Environmental   testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-7:1983
Basic   environmental testing procedures - Part 2-7: Tests - Test Ga and guidance:   Acceleration, steady state
IEC 60068-2-7:1983/AMD1:1986
Amendment   1 - Basic environmental testing procedures - Part 2-7: Tests - Test Ga and   guidance: Acceleration, steady state
IEC 60068-2-10:2005
Environmental   testing - Part 2-10: Tests - Test J and guidance: Mould growth
IEC 60068-2-10:2005/AMD1:2018
Amendment   1 - Environmental testing - Part 2-10: Tests - Test J and guidance: Mould   growth
IEC 60068-2-11:2021
Environmental   testing - Part 2-11: Tests - Test Ka: Salt mist
IEC 60068-2-13:2021
Environmental   testing - Part 2-13: Tests - Test M: Low air pressure
IEC 60068-2-14:2023
Environmental   testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-17:2023
Environmental   testing - Part 2-17: Tests - Test Q: Sealing
IEC 60068-2-18:2017
Environmental   testing - Part 2-18: Tests - Test R and guidance: Water
IEC 60068-2-27:2008
Environmental   testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-30:2025
Environmental   testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-31:2008
Environmental   testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for   equipment-type specimens
IEC 60068-2-38:2021
Environmental   testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic   test
IEC 60068-2-39:2015
Environmental   testing - Part 2-39: Tests - Tests and guidance: Combined temperature or   temperature and humidity with low air pressure tests
IEC 60068-2-45:1980
Basic   environmental testing procedures - Part 2-45: Tests - Test XA and guidance:   Immersion in cleaning solvents
IEC 60068-2-45:1980/COR1:1981
Corrigendum   1 - Environmental testing. Part 2: Tests. Test XA and guidance: Immersion in   cleaning solvents
IEC 60068-2-45:1980/AMD1:1993
Amendment   1 - Basic environmental testing procedures - Part 2-45: Tests - Test XA and   guidance: Immersion in cleaning solvents
IEC 60068-2-47:2005
Environmental   testing - Part 2-47: Test - Mounting of specimens for vibration, impact and   similar dynamic tests
IEC 60068-2-52:2017
Environmental   testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride   solution)
IEC 60068-2-53:2010
Environmental   testing - Part 2-53: Tests and guidance - Combined climatic   (temperature/humidity) and dynamic (vibration/shock) tests
IEC 60068-2-55:2013
Environmental   testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing   including bounce
IEC 60068-2-57:2013
Environmental   testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat   method
IEC 60068-2-60:2015
Environmental   testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
IEC 60068-2-64:2008
Environmental   testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and   guidance
IEC 60068-2-64:2008/AMD1:2019
Amendment   1 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband   random and guidance
IEC 60068-2-65:2013
Environmental   testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
IEC 60068-2-66:1994
Environmental   testing - Part 2: Test methods - Test Cx: Damp heat, steady state   (unsaturated pressurized vapour)
IEC 60068-2-67:1995
Environmental   testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated   test primarily intended for components
IEC 60068-2-67:1995/AMD1:2019
Amendment   1 - Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady   state, accelerated test primarily intended for components
IEC 60068-2-68:1994
Environmental   testing - Part 2-68: Tests - Test L: Dust and sand
IEC 60068-2-70:1995
Environmental   testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings   caused by rubbing of fingers and hands
IEC 60068-2-74:1999
Environmental   testing - Part 2: Tests - Test Xc: Fluid contamination
IEC 60068-2-74:1999/AMD1:2018
Amendment   1 - Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination
IEC 60068-2-75:2014
Environmental   testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60068-2-75:2014/AMD1:2025
Amendment   1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60068-2-78:2025
Environmental   testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
IEC 60068-2-80:2005
Environmental   testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
IEC 60068-2-81:2003
Environmental   testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum   synthesis
IEC 60068-2-85:2019
Environmental   testing - Part 2-85: Tests - Test Fj: Vibration - Long time history   replication
IEC 60068-2-86:2024
Environmental   testing - Part 2-86: Tests -Test Fx: Vibration - Multi-exciter and multi-axis   method
IEC 60068-2-87:2024
Environmental   testing – Part 2-87: Tests – UV-C exposure of materials and components to   simulate ultraviolet germicidal Irradiation or other applications
IEC 60068-3-1:2023
Environmental   testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat   tests
IEC 60068-3-3:2019
Environmental   testing - Part 3-3: Supporting documentation and guidance - Seismic test   methods for equipment
IEC 60068-3-3:2019/COR1:2021
Corrigendum   1 - Environmental testing - Part 3-3: Supporting documentation and guidance -   Seismic test methods for equipment
IEC 60068-3-4:2023
Environmental   testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
IEC 60068-3-6:2018
Environmental   testing - Part 3-6: Supporting documentation and guidance - Confirmation of   the performance of temperature/ humidity chambers
IEC 60068-3-7:2020
Environmental   testing - Part 3-7: Supporting documentation and guidance - Measurements in   temperature chambers for tests A (Cold) and B (Dry heat) (with load)
IEC 60068-3-8:2003
Environmental   testing - Part 3-8: Supporting documentation and guidance - Selecting amongst   vibration tests
IEC 60068-3-11:2007
Environmental   testing - Part 3-11: Supporting documentation and guidance - Calculation of   uncertainty of conditions in climatic test chambers
IEC 60068-3-14:2025
Environmental   testing – Part 3-14: Supporting documentation and guidance – Developing a   climatic sequential test
IEC 60068-5-2:1990
Environmental   testing - Part 5-2: Guide to drafting of test methods - Terms and definitions

這個系列標準其實在國內也有已經轉換的：

 

標準號

標準名稱
GB/T   2423.101-2025
環境試驗   第2部分：試驗方法 試驗：傾斜和搖擺
GB/T   2423.21-2025
環境試驗   第2部分：試驗方法 試驗M：低氣壓
GB/T   2423.66-2025
環境試驗   第2部分：試驗方法 試驗：溫度/濕度/靜負載綜合
GB/T   2423.50-2025
環境試驗   第2部分：試驗方法 試驗Cy：恒定濕熱主要用于元件的加速試驗
GB/T   24237-2025
直接還原爐料用鐵礦球團   成團指數的測定方法
GB/T   24238-2025
預應力鋼絲及鋼絞線用熱軋盤條
GB/T   2423.17-2024
環境試驗   第2部分：試驗方法 試驗Ka：鹽霧
GB/T   2423.34-2024
環境試驗   第2部分：試驗方法 試驗Z/AD:溫度/濕度組合循環試驗
GB/T   2423.65-2024
環境試驗   第2部分：試驗方法 試驗：鹽霧/溫度/濕度/太陽輻射綜合
GB/T   2423.64-2023
環境試驗   第2部分：試驗方法 試驗Fj：振動 長時間歷程再現
GB/T   2423.55-2023
環境試驗   第2部分：試驗方法 試驗Eh：錘擊試驗
GB/T   2423.56-2023
環境試驗   第2部分：試驗方法 試驗Fh：寬帶隨機振動和導則
GB/T   42423-2023
化妝品中二氯苯甲醇和氯苯甘醚的測定   高效液相色譜法
GB/T   2423.24-2022
環境試驗   第2部分：試驗方法 試驗S：模擬地面上的太陽輻射及太陽輻射試驗和氣候老化試驗導則
GB/T   2423.54-2022
環境試驗   第2部分：試驗方法 試驗Xc:流體污染
GB/T   2423.16-2022
環境試驗   第2部分：試驗方法 試驗J和導則：長霉
GB/T   2423.18-2021
環境試驗   第2部分：試驗方法 試驗Kb：鹽霧，交變（氯化鈉溶液）
GB/T   2423.33-2021
環境試驗   第2部分：試驗方法 試驗Kca：高濃度二氧化硫試驗
GB/T   2423.38-2021
環境試驗   第2部分：試驗方法 試驗R：水試驗方法和導則
GB/T   2423.27-2020
環境試驗   第2部分：試驗方法 試驗方法和導則：溫度/低氣壓或溫度/濕度/低氣壓綜合試驗
GB/T   2423.51-2020
環境試驗   第2部分：試驗方法 試驗Ke：流動混合氣體腐蝕試驗
GB/T   2423.10-2019
環境試驗   第2部分：試驗方法 試驗Fc: 振動(正弦)
GB/T   2423.35-2019
環境試驗   第2部分：試驗和導則 氣候(溫度、濕度)和動力學(振動、沖擊)綜合試驗
GB/T   2423.5-2019
環境試驗   第2部分:試驗方法 試驗Ea和導則:沖擊
GB/T   2423.63-2019
環境試驗   第2部分:試驗方法 試驗:溫度(低溫、高溫)/低氣壓/振動(混合模式)綜合
GB/T   2423.39-2018
環境試驗   第2部分:試驗方法 試驗Ee和導則:散裝貨物試驗包含彈跳
GB/T   2423.47-2018
環境試驗   第2部分：試驗方法 試驗Fg：聲振
GB/T   2423.48-2018
環境試驗   第2部分: 試驗方法 試驗Ff:振動 時間歷程和正弦拍頻法
GB/T   2423.61-2018
環境試驗   第2部分:試驗方法 試驗和導則:大型試件砂塵試驗
GB/T   2423.62-2018
環境試驗   第2部分:試驗方法 試驗Fx和導則:多輸入多輸出振動
GB/T   2423.7-2018
環境試驗   第2部分:試驗方法 試驗Ec:粗率操作造成的沖擊（主要用于設備型樣品）
GB/T   2423.3-2016
環境試驗   第2部分：試驗方法 試驗Cab：恒定濕熱試驗
GB/T   32423-2015
系統與軟件工程   驗證與確認
GB/T   2423.20-2014
環境試驗   第2部分：試驗方法 試驗Kd：接觸點和連接件的硫化氫試驗
GB/T   2423.40-2013
環境試驗   第2部分：試驗方法 試驗Cx：未飽和高壓蒸汽恒定濕熱
GB/T   2423.30-2013
環境試驗   第2部分：試驗方法 試驗XA和導則：在清洗劑中浸漬
GB/T   2423.41-2013
環境試驗   第2部分：試驗方法 風壓
GB/T   2423.19-2013
環境試驗   第2部分：試驗方法 試驗Kc：接觸點和連接件的二氧化硫試驗
GB/T   2423.23-2013
環境試驗   第2部分：試驗方法 試驗Q：密封
GB/T   2423.22-2012
環境試驗   第2部分：試驗方法 試驗N：溫度變化
GB/T   2423.45-2012
環境試驗   第2部分：試驗方法 試驗Z/ABDM：氣候順序
GB/T   2423.50-2012
環境試驗   第2部分：試驗方法 試驗Cy: 恒定濕熱 主要用于元件的加速試驗
GB/T   24231-2009
鉻礦石   鎂、鋁、硅、鈣、鈦、釩、鉻、錳、鐵和鎳含量的測定 波長色散X射線熒光光譜法
GB/T   24234-2009
鑄鐵   多元素含量的測定 火花放電原子發射光譜法(常規法)
GB/T   24230-2009
鉻礦石和鉻精礦   鉻含量的測定 滴定法
GB/T   24232-2009
錳礦石和鉻礦石   校核取樣和制樣偏差的試驗方法
GB/T   24233-2009
錳礦石和鉻礦石   評定品質波動和校核取樣精密度的試驗方法
GB/T   24235-2009
直接還原爐料用鐵礦石   低溫還原粉化率和金屬化率的測定 氣體直接還原法
GB/T   24236-2009
直接還原爐用鐵礦石   還原指數、最終還原度和金屬化率的測定
GB/T   24237-2009
直接還原爐料用鐵礦球團   成團性的測定方法
GB/T   24239-2009
直接還原鐵和熱壓鐵塊   取樣和制樣方法
GB/T   2423.59-2008
電工電子產品環境試驗   第2部分：試驗方法 試驗Z/ABMFh：溫度（低溫、高溫）/低氣壓/振動（隨機）綜合
GB/T   2423.1-2008
電工電子產品環境試驗   第2部分：試驗方法 試驗A： 低溫
GB/T   2423.21-2008
電工電子產品環境試驗   第2部分：試驗方法 試驗M：低氣壓
GB/T   2423.2-2008
電工電子產品環境試驗   第2部分：試驗方法 試驗B：高溫
GB/T   2423.60-2008
電工電子產品環境試驗   第2部分：試驗方法 試驗U：引出端及整體安裝件強度
GB/T   22423-2008
通信終端設備的回收處理要求
GB/T   2423.101-2008
電工電子產品環境試驗   第2部分：試驗方法 試驗：傾斜和搖擺
GB/T   2423.102-2008
電工電子產品環境試驗   第2部分：試驗方法 試驗：溫度（低溫、高溫）/低氣壓/振動（正弦）綜合
GB/T   2423.4-2008
電工電子產品環境試驗   第2部分：試驗方法 試驗Db 交變濕熱（12h＋12h循環）
GB/T   2423.43-2008
電工電子產品環境試驗   第2部分：試驗方法 振動、沖擊和類似動力學試驗樣品的安裝
GB/T   2423.57-2008
電工電子產品環境試驗   第2-81部分: 試驗方法 試驗Ei: 沖擊 沖擊響應譜合成
GB/T   2423.58-2008
電工電子產品環境試驗   第2-80部分: 試驗方法 試驗Fi: 振動 混合模式
GB/T   2423.15-2008
電工電子產品環境試驗   第2部分: 試驗方法 試驗Ga和導則: 穩態加速度
GB/T   2423.32-2008
電工電子產品環境試驗   第2部分：試驗方法 試驗Ta: 潤濕稱量法可焊性
GB/T   2423.37-2006
電工電子產品環境試驗   第2部分：試驗方法 試驗L：沙塵試驗
GB/T   2423.28-2005
電工電子產品環境試驗   第2部分：試驗方法 試驗T：錫焊
GB/T   2423.53-2005
電工電子產品環境試驗   第2部分:試驗方法 試驗Xb：由手的磨擦造成標記和印刷文字的磨損
GB/T   2423.52-2003
電工電子產品環境試驗   第2部分:試驗方法 試驗77:結構強度與撞擊

當然熟悉IEC 60601 專標的小伙伴應該知道，在很多IEC 60601專標中關于機械強度測試的時候都會有一個建議的分類：譬如7M2 或者7M3，有沒有好奇過這些分類的出處是啥，這些分類又代表這什么意思？

 

其實這個分類出自于IEC 60721系列標準，這一系列標準是基于產品的使用環境特性來進行分類的，同時基于這些個不同分類對應到IEC 60068中的測試方法或?qū)EC 60068系列標準中的測試方法進行進一步的修正。

 

IEC   60721-1:1990
Classification   of environmental conditions - Part 1: Environmental parameters and their   severities
IEC 60721-1:1990/AMD1:1992
Amendment   1 - Classification of environmental conditions - Part 1: Environmental   parameters and their severities
IEC 60721-1:1990/AMD2:1995
Amendment   2 - Classification of environmental conditions - Part 1: Environmental   parameters and their severities
IEC 60721-2-1:2013
Classification   of environmental conditions - Part 2-1: Environmental conditions appearing in   nature - Temperature and humidity
IEC 60721-2-2:2024
Classification   of environmental conditions - Part 2-2: Environmental conditions appearing in   nature - Precipitation and wind
IEC 60721-2-3:2013
Classification   of environmental conditions - Part 2-3: Environmental conditions appearing in   nature - Air pressure
IEC 60721-2-4:2018
Classification   of environmental conditions - Part 2-4: Environmental conditions appearing in   nature - Solar radiation and temperature
IEC 60721-2-5:1991
Classification   of environmental conditions - Part 2: Environmental conditions appearing in   nature - Section 5: Dust, sand, salt mist
IEC 60721-2-6:2022
Classification   of environmental conditions - Part 2-6: Environmental conditions appearing in   nature - Earthquake vibration and shock
IEC 60721-2-6:2022/COR1:2023
Corrigendum   1 - Classification of environmental conditions - Part 2-6: Environmental   conditions appearing in nature - Earthquake vibration and shock
IEC 60721-2-7:2018
Classification   of environmental conditions - Part 2-7: Environmental conditions appearing in   nature - Fauna and flora
IEC 60721-2-9:2014
Classification   of environmental conditions - Part 2-9: Environmental conditions appearing in   nature - Measured shock and vibration data - Storage, transportation and   in-use
IEC 60721-3-0:2020
Classification   of environmental conditions - Part 3-0: Classification of groups of   environmental parameters and their severities - Introduction
IEC 60721-3-1:2018
Classification   of environmental conditions - Part 3-1: Classification of groups of   environmental parameters and their severities - Storage
IEC 60721-3-1:2018/COR1:2024
Corrigendum   1 - Classification of environmental conditions - Part 3-1: Classification of   groups of environmental parameters and their severities - Storage
IEC 60721-3-2:2018
Classification   of environmental conditions - Part 3-2: Classification of groups of   environmental parameters and their severities - Transportation and Handling
IEC 60721-3-2:2018/COR1:2018
Corrigendum   1 - Classification of environmental conditions - Part 3-2: Classification of   groups of environmental parameters and their severities - Transportation and   handling
IEC 60721-3-2:2018/COR2:2022
Corrigendum   2 - Classification of environmental conditions - Part 3-2: Classification of   groups of environmental parameters and their severities - Transportation and   handling
IEC 60721-3-2:2018/COR3:2024
Corrigendum   3 - Classification of environmental conditions - Part 3-2: Classification of   groups of environmental parameters and their severities - Transportation and   handling
IEC 60721-3-3:2019
Classification   of environmental conditions - Part 3-3: Classification of groups of   environmental parameters and their severities - Stationary use at   weatherprotected locations
IEC 60721-3-4:2019
Classification   of environmental conditions - Part 3-4: Classification of groups of   environmental parameters and their severities - Stationary use at   non-weatherprotected locations
IEC 60721-3-4:2019/COR1:2023
Corrigendum   1 - Classification of environmental conditions - Part 3-4: Classification of   groups of environmental parameters and their severities - Stationary use at   non-weatherprotected locations
IEC 60721-3-5:1997
Classification   of environmental conditions - Part 3: Classificationof groups of   environmental parameters and their severities -Section 5: Ground vehicle   installations
IEC 60721-3-6:2025
Classification   of environmental conditions - Part 3-6: Classification of groups of   environmental parameters and their severities - Ship environments
IEC 60721-3-7:1995
Classification   of environmental conditions - Part 3: Classification of groups of   environmental parameters and their severities - Section 7: Portable and   non-stationary use
IEC 60721-3-7:1995/AMD1:1996
Amendment   1 - Classification of environmental conditions - Part 3: Classification of   groups of environmental parameters and their severities - Section 7: Portable   and non-stationary use
IEC 60721-3-9:2024
Classification   of environmental conditions - Part 3-9: Classification of groups of   environmental parameters and their severities - Microclimates inside products
IEC TR 60721-4-0:2002
Classification   of environmental conditions - Part 4-0: Guidance for the correlation and   transformation of the environmental condition classes of IEC 60721-3 to the   environmental tests of IEC 60068 - Introduction
IEC TS 60721-4-3:2023
Classification   of environmental conditions - Part 4-3: Guidance for the correlation and   transformation of environmental condition classes of IEC 60721-3 to the   environmental tests of IEC 60068 - Stationary use at weatherprotected   locations
IEC TR 60721-4-5:2001
Classification   of environmental conditions - Part 4-5: Guidance for the correlation and   transformation of environmental condition classes of IEC 60721-3 to the   environmental tests of IEC 60068 - Ground vehicle installations
IEC TR 60721-4-5:2001/AMD1:2003
Amendment   1 - Classification of environmental conditions - Part 4-5: Guidance for the   correlation and transformation of environmental condition classes of IEC   60721-3 to the environmental tests of IEC 60068 - Ground vehicle   installations
IEC TR 60721-4-6:2001
Classification   of environmental conditions - Part 4-6: Guidance for the correlation and   transformation of environmental condition classes of IEC 60721-3 to the   environmental tests of IEC 60068 - Ship environment
IEC TR 60721-4-6:2001/AMD1:2003
Amendment   1 - Classification of environmental conditions - Part 4-6: Guidance for the   correlation and transformation of environmental condition classes of IEC   60721-3 to the environmental tests of IEC 60068 - Ship environment
IEC TR 60721-4-7:2001
Classification   of environment conditions - Part 4-7: Guidance for the correlation and   transformation of environmental condition classes of IEC 60721-3 to the   environmental tests of IEC 60068 - Portable and non-stationary use
IEC TR 60721-4-7:2001/AMD1:2003
Amendment   1 - Classification of environment conditions - Part 4-7: Guidance for the   correlation and transformation of environmental condition classes of IEC   60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary   use

 
所以綜上，大家在進行規劃產品的環境測試的時候其實可以依據產品的預期使用環境進行分類，再看分類所對應的測試方法來設計適用于自己產品的環境測試條件和方法，當然標準中給出的只是一個建議，大家也可以出于不同的目的，譬如挑戰自己產品的極限或者證明自己設計的冗余，可以加嚴加重測試條件。但是有了這系列的環境測試設計邏輯，至少面對監管機構或者客戶挑戰的時候也有一個‘靠山’。
 
產品環境測試標準清單
分享到：

來源：MD SRE

相關新聞：