中文字幕一级黄色A级片|免费特级毛片。性欧美日本|偷拍亚洲欧美1级片|成人黄色中文小说网|A级片视频在线观看|老司机网址在线观看|免费一级无码激情黄所|欧美三级片区精品网站999|日韩av超碰日本青青草成人|一区二区亚洲AV婷婷

采用認證方式的設備FCC ID要與設備的其他信息一起標注在銘牌上。對FCC ID號碼的表示方式?jīng)]有特別規定，但FCC建議在ID號碼周圍劃線以將其與其他信息區分開來，如：FCC ID：×××××123
印有FCC ID的銘牌在整個認證過程中可能會被要求修改，為防止浪費，在正式獲得認可之前，建議申請人不要大量印刷印有FCC ID的銘牌或在產品上絲印、雕刻等。
設備上的顯著位置標有以下這段聲明：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
如果設備有兩個或多個組成部分，通過線纜連接起來，銷售時作為一個整體的，上面的聲明只要標在主體控制部分。若設備太小標注的面積不夠，上述的聲明可寫在用戶手冊或使用說明書的顯著位置處，或者標注在設備的包裝盒上。
有意發射機的用戶手冊或使用說明書還應提醒使用者：未經批準對設備進行改變或修改的話，使用者對設備的使用權利將可能被取消。若用戶手冊或使用說明書不是以紙質方式提供的，例如是以磁盤或通過互聯網等方式提供的，該信息也必須包括在內，以使用戶順利得到該信息。

FCC DOC認證標志使用方法 - 如果是FCC DOC，銘牌上必須有FCC LOGO：

如果設備經過測試被證明符合FCC法規的要求，應使用以下標簽：

標簽格式（符合性聲明）
如果個人計算機是由分別獲得認證的部件組裝而成，該個人計算機不需再進行測試，使用以下有組裝說明的標簽：

標簽格式，組裝（符合性聲明）
若設備太小或?qū)⒁陨蠘撕灧旁谠O(shè)備上的做法行不通時，例如CPU主板或直插式電路板外設器件，產品標識標簽可標在用戶手冊或使用說明書的顯著位置處，但是，唯一的識別信息（商標和型號）和FCC標識必須標在產品上。
標簽不應使用即貼型的紙質標簽，標簽應該永久性地附著在設備上，并且在消費者購買時能夠很容易和清楚地看到該標簽。永久性地附著是指把標簽上的內容蝕刻、雕刻、壓印、絲網印刷或印刷在設備主體上使之不能磨滅，或者將金屬、塑料或其它材料制成的標簽以焊接、鉚接或永久性黏合劑的形式固定在設備主體上。標簽的設計還要考慮到設備在環境中的使用壽命。

A類數字設備或外設的用戶使用說明書的顯著位置印有以下聲明或類似的聲明：
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

B類數字設備或外設的用戶使用說明書的顯著位置印有以下聲明或類似的聲明：
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
如果設備是由多個數字設備組成，以上兩段聲明只需要包含在主控制單元的使用說明書中即可。如果說明書或用戶手冊不是以紙質方式提供的，而是以磁盤、互聯網等方式提供，以上的聲明也應以相應方式提供給用戶。

FCC Verification 需要有FCC警告語

如果是FCC Verification，銘牌和說明書上分別要有警告語：（如果銘牌太小可不加）

采用驗證方式的時候，產品上必須有如下標簽：
標簽格式（驗證）
該標簽必須包括型號（例如：Model. No. 123）、公司名稱或商標（Company’s name or trade name）、原產國（Country of origin）的信息。根據美國海關和聯邦貿易委員會（Federal Trade Commission）的規定，所有在美國之外生產的產品都必須標明原產國。
任何情況下，按驗證方式的產品標簽上都不能出現FCC ID號碼。

標簽或產品說明書中應具有相關類似描述：
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.（適用于如Part 73的無線電廣播設備等無線電廣播接收裝置）
This device is verified to comply with Part 15 of the FCC Rules for use with cable television service.（適用于電纜線及其連接器等）
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.（其他所有設備）
注：如果設備是由電線連接的兩個或兩個以上部分組成，以上標簽應加貼在主要控制單元上。如果設備太小，不能加貼以上陳述內容，則必須在設備包裝或說明書中體現以上陳述內容。
 

§15.19 Labelling requirements.

(a) In addition to the requirements in part 2 of this chapter, a device subject to certification, or verification shall be labelled as follows:

(1) Receivers associated with the operation of a licensed radio service, e.g., FM broadcast under part 73 of this chapter, land mobile operation under part 90, etc., shall bear the following statement in a conspicuous location on the device:

 

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

 

(2) A stand-alone cable input selector switch, shall bear the following statement in a conspicuous location on the device:

 

This device is verified to comply with part 15 of the FCC Rules for use with cable television service.

 

(3) All other devices shall bear the following statement in a conspicuous location on the device:

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

 

(4) Where a device is constructed in two or more sections connected by wires and marketed together, the statement specified under paragraph (a) of this section is required to be affixed only to the main control unit.

(5) When the device is so small or for such use that it is not practicable to place the statement specified under paragraph (a) of this section on it, the information required by this paragraph shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. However, the FCC identifier or the unique identifier, as appropriate, must be displayed on the device.

 

(b) Products subject to authorization under a Declaration of Conformity shall be labelled as follows:

(1) The label shall be located in a conspicuous location on the device and shall contain the unique identification described in §2.1074 of this chapter and the following logo:

(i) If the product is authorized based on testing of the product or system; or

View or download PDF http://www.ecfr.gov/graphics/pdfs/er09de03.000.pdf

 

(ii) If a personal computer is authorized based on assembly using separately authorized components, in accordance with §15.101(c)(2) or (c)(3), and the resulting product is not separately tested:

View or download PDF http://www.ecfr.gov/graphics/pdfs/er09de03.001.pdf

 

(2) Label text and information should be in a size of type large enough to be readily legible, consistent with the dimensions of the equipment and the label. However, the type size for the text is not required to be larger than eight point.

(3) When the device is so small or for such use that it is not practicable to place the statement specified under paragraph (b)(1) of this section on it, such as for a CPU board or a plug-in circuit board peripheral device, the text associated with the logo may be placed in a prominent location in the instruction manual or pamphlet supplied to the user. However, the unique identification (trade name and model number) and the logo must be displayed on the device.

(4) The label shall not be a stick-on, paper label. The label on these products shall be permanently affixed to the product and shall be readily visible to the purchaser at the time of purchase, as described in §2.925(d) of this chapter. “Permanently affixed” means that the label is etched, engraved, stamped, silkscreened, indelibly printed, or otherwise permanently marked on a permanently attached part of the equipment or on a nameplate of metal, plastic, or other material fastened to the equipment by welding, riveting, or a permanent adhesive. The label must be designed to last the expected lifetime of the equipment in the environment in which the equipment may be operated and must not be readily detachable.

(c) [Reserved]

(d) Consumer electronics TV receiving devices, including TV receivers, videocassette recorders, and similar devices, that incorporate features intended to be used with cable television service, but do not fully comply with the technical standards for cable ready equipment set forth in §15.118, shall not be marketed with terminology that describes the device as “cable ready” or “cable compatible,” or that otherwise conveys the impression that the device is fully compatible with cable service. Factual statements about the various features of a device that are intended for use with cable service or the quality of such features are acceptable so long as such statements do not imply that the device is fully compatible with cable service. Statements relating to product features are generally acceptable where they are limited to one or more specific features of a device, rather than the device as a whole. This requirement applies to consumer TV receivers, videocassette recorders and similar devices manufactured or imported for sale in this country on or after October 31, 1994.

[54 FR 17714, Apr. 25, 1989, as amended at 59 FR 25341, May 16, 1994; 61 FR 18509, Apr. 26, 1996; 61 FR 31048, June 19, 1996; 62 FR 41881, Aug. 4, 1997; 63 FR 36602, July 7, 1998; 65 FR 64391, Oct. 27, 2000; 68 FR 66733, Nov. 28, 2003; 68 FR 68545, Dec. 9, 2003]

 

§2.925 Identification of equipment.

(a) Each equipment covered in an application for equipment authorization shall bear a nameplate or label listing the following:

(1) FCC Identifier consisting of the two elements in the exact order specified in §2.926. The FCC Identifier shall be preceded by the term FCC ID in capital letters on a single line, and shall be of a type size large enough to be legible without the aid of magnification.

Example: FCC ID XXXXX123. XXXXX—Grantee Code 123—Equipment Product Code

(2) Any other statements or labeling requirements imposed by the rules governing the operation of the specific class of equipment, except that such statement(s) of compliance may appear on a separate label at the option of the applicant/grantee.

(3) Equipment subject only to registration will be identified pursuant to part 68 of this chapter.

(b) Any device subject to more than one equipment authorization procedure may be assigned a single FCC Identifier. However, a single FCC Identifier is required to be assigned to any device consisting of two or more sections assembled in a common enclosure, on a common chassis or circuit board, and with common frequency controlling circuits. Devices to which a single FCC Identifier has been assigned shall be identified pursuant to paragraph (a) of this section.

(1) Separate FCC Identifiers may be assigned to a device consisting of two or more sections assembled in a common enclosure, but constructed on separate sub-units or circuit boards with independent frequency controlling circuits. The FCC Identifier assigned to any transmitter section shall be preceded by the term TX FCC ID, the FCC Identifier assigned to any receiver section shall be preceded by the term RX FCC ID and the identifier assigned to any remaining section(s) shall be preceded by the term FCC ID.

(2) Where telephone equipment subject to part 68 of this chapter, and a radiofrequency device subject to equipment authorization requirements are assembled in a common enclosure, the nameplate/label shall display the FCC Registration Number in the format specified in part 68 and the FCC Identifier in the format specified in paragraph (a) of this section.

(3) For a transceiver, the receiver portion of which is subject to verification pursuant to §15.101 of this chapter, the FCC Identifier required for the transmitter portion shall be preceded by the term FCC ID.

(c) [Reserved]

(d) In order to validate the grant of equipment authorization, the nameplate or label shall be permanently affixed to the equipment and shall be readily visible to the purchaser at the time of purchase.

(1) As used here, permanently affixed means that the required nameplate data is etched, engraved, stamped, indelibly printed, or otherwise permanently marked on a permanently attached part of the equipment enclosure. Alternatively, the required information may be permanently marked on a nameplate of metal, plastic, or other material fastened to the equipment enclosure by welding, riveting, etc., or with a permanent adhesive. Such a nameplate must be able to last the expected lifetime of the equipment in the environment in which the equipment will be operated and must not be readily detachable.

(2) As used here, readily visible means that the nameplate or nameplate data must be visible from the outside of the equipment enclosure. It is preferable that it be visible at all times during normal installation or use, but this is not a prerequisite for grant of equipment authorization.

(e) A software defined radio may be equipped with a means such as a user display screen to display the FCC identification number normally contained in the nameplate or label. The information must be readily accessible, and the user manual must describe how to access the electronic display.

(f) Where it is shown that a permanently affixed nameplate is not desirable or is not feasible, an alternative method of positively identifying the equipment may be used if approved by the Commission. The proposed alternative method of identification and the justification for its use must be included with the application for equipment authorization.

Note: As an example, a device intended to be implanted within the body of a test animal or person would probably require an alternate method of identification.

(g) The term FCC ID and the coded identification assigned by the Commission shall be in a size of type large enough to be readily legible, consistent with the dimensions of the equipment and its nameplate. However, the type size for the FCC Identifier is not required to be larger than eight-point.

[44 FR 17177, Mar. 21, 1979, as amended at 44 FR 55574, Sept. 27, 1979; 46 FR 21013, Apr. 8, 1981; 52 FR 21687, June 9, 1987; 54 FR 1698, Jan. 17, 1989; 62 FR 10470, Mar. 7, 1997; 66 FR 50840, Oct. 5, 2001; 77 FR 43536, July 25, 2012; 80 FR 33441, June 12, 2015]